一单一库标准查询 - 国家市场监督管理总局能力项目库
国家市场监督管理总局《检验检测机构资质认定能力项目库》在线查询系统 · 共 62,216 项国家标准/参数 · 支持按领域、编号、名称检索
本站提供 一单一库标准 在线查询与 CMA一单一库比对 功能，
基于国家市场监督管理总局 检验检测机构资质认定能力项目库，
帮助 第三方实验室 快速完成 实验室CMA认证 标准合规性检查与 标准能力校验。
📊
开始比对
上传 Excel 文件、粘贴标准数据、或加载样本数据，系统自动与一单一库比对
共 62,216 条标准/参数
| 序号 | 标准编号 | 标准(方法)名称 | 领域 | 备注 |
|---|---|---|---|---|
| 32451 | ISO8974-2002 | 气相色谱法测定酚醛树脂中残留苯酚含量Plastics - Phenolic Resins - Determination of Residual Phenol Content by Gas Chromatography Third Edition | 产品质量检验 | |
| 32452 | ISO8975-1989 | 酚醛树脂pH值的测定Plastics -- Phenolic resins -- Determination of pH | 产品质量检验 | |
| 32453 | ISO898-1:2013 | 碳钢和合金钢制造的紧固件机械性能第1部分:规定性能等级的螺栓､螺钉和螺柱粗牙螺纹和细牙螺纹Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898- 1:2013) | 产品质量检验 | |
| 32454 | ISO898-2:2022 | 紧固件碳钢和合金钢紧固件的机械性能第2部分:规定性能等级的螺母Fasteners. Mechanical properties of fasteners made of carbon steel and alloy steel. - Part 2: Nuts with specified property classes | 产品质量检验 | |
| 32455 | ISO898-3:2018+Amd1:2020 | 碳钢和合金钢紧固件机械性能第3部分:规定性能等级的平垫圈Mechanical properties of fasteners made of carbon steel and alloy steel -Part 3: Flat washers with specified property classes | 产品质量检验 | |
| 32456 | ISO898-5:2012 | 紧固件机械性能螺栓与螺钉的扭矩试验和破坏扭矩公称直径1~10mmMechanical properties of fasteners made of carbon steel and alloy steel -- Part 5: Set screws and similar threaded fasteners with specified hardness classes -- Coarse thread and fine pitch thread | 产品质量检验 | |
| 32457 | ISO898-7:1992 | 紧固件机械性能第7部分:螺栓和螺钉的扭矩试验和最小扭矩公称直径1mm-10mmMechanical properties of fasteners -- Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm | 产品质量检验 | |
| 32458 | ISO8980-1:2017 | 眼科光学-未切边成品眼镜片-第1部分:单光和多焦点镜片要求Ophthalmic optics - Uncut finished spectacle lenses - Part 1: Specifications for single-vision and multifocal lenses | 产品质量检验 | |
| 32459 | ISO8980-2:2017 | 眼科光学-未切边成品眼镜片-第2部分:渐变焦镜片要求Ophthalmic optics - Uncut finished spectacle lenses - Part 2: Specifications for power-variation lenses | 产品质量检验 | |
| 32460 | ISO8980-3:2022 | 眼科光学-未切边成品眼镜片-第3部分:透射性能规范及试验方法Ophthalmic optics - Uncut finished spectacle lenses - Part 3: Transmittance specifications and test methods | 产品质量检验 | |
| 32461 | ISO8980-5:2005 | 眼科光学-未切边成品眼镜片-第5部分:声称耐磨眼镜片的最低要求Ophthalmic optics -- Uncut finished spectacle lenses -- Part 5: Minimum requirements for spectacle lens surfaces claimed to be abrasion-resistant | 产品质量检验 | |
| 32462 | ISO8987-2005 | 酚醛树脂在乙阶转变试板上反应活性的测定Plastics -- Phenolic resins -- Determination of reactivity on a B-transformation test plate | 产品质量检验 | |
| 32463 | ISO8988-2006 | 塑料酚醛树脂六亚甲基四胺含量的测定基耶达尔法,高氯酸法及盐酸法Plastics -- Phenolic resins -- Determination of hexamethylenetetramine content -- Kjeldahl method, perchloric acid method and hydrochloric acid method | 产品质量检验 | |
| 32464 | ISO8989-1995 | 液体酚醛树脂水混溶性的测定Plastics -- Liquid phenolic resins -- Determination of water miscibility | 产品质量检验 | |
| 32465 | ISO899-1:2017 | 塑料 - 蠕变行为的测定 - 第1部分:拉伸蠕变Plastics - Determination of creep behaviour - Part 1: Tensile creep | 产品质量检验 | |
| 32466 | ISO899-2:2024 | 塑料蠕变性能的测定第2部分:三点加载弯曲蠕变Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading | 产品质量检验 | |
| 32467 | ISO8990:1994 | 绝热稳态传热性质的测定标定和防护热箱法Thermal insulation -- Determination of steady-state thermal transmission properties -- Calibrated and guarded hot box | 产品质量检验 | |
| 32468 | ISO8992:2005 | 紧固件.螺栓,螺钉,螺柱和螺母的一般要求Fasteners -- General requirements for bolts, screws, studs and nuts | 产品质量检验 | |
| 32469 | ISO9015-1:2001 | 金属材料焊接的破坏性测试硬度测试第1节:弓形焊接点的硬度测试Destructive tests on welds in metallic materials -- Hardness testing -- Part 1: Hardness test on arc welded joints | 产品质量检验 | |
| 32470 | ISO9015-2:2016 | 金属材料焊缝破坏性试验硬度试验第2部分:焊接接头显微硬度试验Destructive tests on welds in metallic materials -- Hardness testing -- Part 2: Microhardness testing of welded joints | 产品质量检验 | |
| 32471 | ISO9016:2022 | 金属材料焊接的破坏试验冲击试验试样定位､切口定向和检查Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination - Third edition | 产品质量检验 | |
| 32472 | ISO9017:2017 | 金属材料焊缝破坏性试验断裂试验Destructive tests on welds in metallic materials - Fracture test | 产品质量检验 | |
| 32473 | ISO9018:2015 | 金属材料焊缝破坏性试验十字接头和搭接接头拉伸试验方法Destructive tests on welds in metallic materials -- Tensile test on cruciform and lapped joints | 产品质量检验 | |
| 32474 | ISO9021:2020 | 摩托车和轻便摩托车控制装置类型位置和功能Motorcycles and mopeds - Controls - Types, positions and functions | 产品质量检验 | |
| 32475 | ISO9035:1989 | 铁矿石酸溶性铁(II)含量的测定-滴定法Iron ores - Determination of acid-soluble iron(II) content - Titrimetric method | 产品质量检验 |