一单一库标准查询 - 国家市场监督管理总局能力项目库
国家市场监督管理总局《检验检测机构资质认定能力项目库》在线查询系统 · 共 62,216 项国家标准/参数 · 支持按领域、编号、名称检索
本站提供 一单一库标准 在线查询与 CMA一单一库比对 功能，
基于国家市场监督管理总局 检验检测机构资质认定能力项目库，
帮助 第三方实验室 快速完成 实验室CMA认证 标准合规性检查与 标准能力校验。
📊
开始比对
上传 Excel 文件、粘贴标准数据、或加载样本数据，系统自动与一单一库比对
共 62,216 条标准/参数
| 序号 | 标准编号 | 标准(方法)名称 | 领域 | 备注 |
|---|---|---|---|---|
| 31801 | ISO4591:1992 | 塑料制品;薄膜和薄片-用重量分析技术(重量分析厚度)测定样品的平均厚度､轧辊的平均厚度和成品率 Plastics - Film and sheeting - Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness) | 产品质量检验 | |
| 31802 | ISO4592:1992 | 塑料薄膜和薄片长度和宽度的测定Plastics - Film and sheeting - Determination of length and width | 产品质量检验 | |
| 31803 | ISO4593:1993 | 塑料薄膜和薄片厚度的测定机械测量法 Plastics - Film and sheeting - Determination of thickness by mechanical scanning | 产品质量检验 | |
| 31804 | ISO4602:2010 | 纺织玻璃纤维.织物.单位长度经纱和纬纱的纱数的测定Reinforcements - Woven fabrics - Determination of number of yarns per unit length of warp and weft | 产品质量检验 | |
| 31805 | ISO4603-1993/Amd1-2010 | 修订1:纺织玻璃纤维机织物厚度的测定Textile glass - Woven fabrics - Determination of thickness | 产品质量检验 | |
| 31806 | ISO4604:2011 | 增强材料机织物试验方法第4部分:弯曲硬挺度的测定Reinforcement fabrics -- Determination of conventional flexural stiffness -- Fixed-angle flexometer method | 产品质量检验 | |
| 31807 | ISO4606:1995 | 玻璃纤维机织物用条样法测定拉伸断裂强力和断裂伸长Textile glass -- Woven fabric -- Determination of tensile breaking force and elongation at break by the strip method | 产品质量检验 | |
| 31808 | ISO4611:2010 | 塑料-暴露于湿热､水喷雾和盐雾中影响的测定Plastics -- Determination of the effects of exposure to damp heat, water spray and salt mist | 产品质量检验 | |
| 31809 | ISO4614-1977 | 三聚氰胺甲醛模塑制品中可提取甲醛测定方法Plastics -- Melamine-formaldehyde mouldings -- Determination of extractable formaldehyde | 产品质量检验 | |
| 31810 | ISO4622:1992 | 色漆和清漆.可堆叠性的压力试验Paints and varnishes - Pressure test for stackability | 产品质量检验 | 废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请 |
| 31811 | ISO4623-1:2018 | 色漆和清漆耐丝状腐蚀的测定第1部分:钢基材Paints and varnishes - Determination of resistance to filiform corrosion - Part 1: Steel substrates | 产品质量检验 | |
| 31812 | ISO4623-2:2016 | 色漆和清漆耐丝状腐蚀的测定第2部分:铝基材Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates | 产品质量检验 | |
| 31813 | ISO4624:2002 | 色漆和清漆-附着力拉脱试验 Paints and varnishes - Pull-off test for adhesion | 产品质量检验 | 废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请 |
| 31814 | ISO4624:2023 | 色漆和清漆-拉开法附着力试验Paints and varnishes - Pull-off test for adhesion | 产品质量检验 | |
| 31815 | ISO4625-1:2020 | 色漆和清漆用漆基软化点的测定第1部分:环球法Binders for paints and varnishes - Determination of softening point - Part 1: Ring-and-ball method | 产品质量检验 | |
| 31816 | ISO4626:2023 | 挥发性有机液体用作原料的有机溶剂沸程的测定Volatile organic liquids-Determination of boiling range of organic solvents used as raw materials | 产品质量检验 | |
| 31817 | ISO4628-1:2003 | 涂料和清漆.涂料覆层降解的评定.一般缺陷的程度､数量和大小的规定.第1部分:一般原则和等级表This part of ISO 4628 defines a system for designating the quantity and size of defects and the intensity of changes in appearance of coatings Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system | 产品质量检验 | 废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请 |
| 31818 | ISO4628-1:2016 | 涂料和清漆涂料降解评估缺陷数量和尺寸的指定以及外观均匀变化的强度第1部分:总体介绍和指定系统Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system | 产品质量检验 | |
| 31819 | ISO4628-10:2024 | 色漆和清漆缺陷的数量和大小以及外观均匀变化程度的评价第10部分:丝状腐蚀等级的评定Paints and varnishes-Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance-Part 10: Assessment of degree of filiform corrosion | 产品质量检验 | |
| 31820 | ISO4628-2:2003 | 涂料和清漆.涂料覆层降解的评定.一般缺陷的程度､数量和大小的规定.第2部分:起泡程度的规定This part of ISO 4628 describes a method for assessing the degree of blistering of coatings by comparison with pictorial standards. The pictorial Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering | 产品质量检验 | 废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请 |
| 31821 | ISO4628-2:2016 | 涂料和清漆涂料降解评估缺陷数量和尺寸的指定以及外观均匀变化的强度第2部分:起泡程度的评估Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering | 产品质量检验 | |
| 31822 | ISO4628-3:2016 | 涂料和清漆 - 涂料降解评估 - 缺陷数量和尺寸的指定以及外观均匀变化的强度 - 第3部分:生锈程度评估Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting | 产品质量检验 | 废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请 |
| 31823 | ISO4628-5:2022 | 色漆和清漆缺陷的数量和大小以及外观均匀变化程度的评价第5部分:剥落等级的评定Paints and varnishes-Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance-Part 5: Assessment of degree of flaking - Fourth edition | 产品质量检验 | |
| 31824 | ISO4628-6:2011 | 色漆和清漆涂层降解的评定外表均匀变化强度以及缺陷的数量和大小的规定第6部分:用胶带法评定粉化等级Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method | 产品质量检验 | 废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请 |
| 31825 | ISO4628-6:2023 | 色漆和清漆涂层降解的评定.缺陷的数量和规模,以及外观均匀变化强度的指定.第6部分:用胶粘带法粉化程度评估Paints and varnishes-Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance-Part 6: Assessment of degree of chalking by tape method | 产品质量检验 |