一单一库标准查询 - 国家市场监督管理总局能力项目库
国家市场监督管理总局《检验检测机构资质认定能力项目库》在线查询系统 · 共 62,216 项国家标准/参数 · 支持按领域、编号、名称检索
本站提供 一单一库标准 在线查询与 CMA一单一库比对 功能，
基于国家市场监督管理总局 检验检测机构资质认定能力项目库，
帮助 第三方实验室 快速完成 实验室CMA认证 标准合规性检查与 标准能力校验。
📊
开始比对
上传 Excel 文件、粘贴标准数据、或加载样本数据，系统自动与一单一库比对
共 62,216 条标准/参数
| 序号 | 标准编号 | 标准(方法)名称 | 领域 | 备注 |
|---|---|---|---|---|
| 31651 | ISO3506-1:2020 | 紧固件耐腐蚀不锈钢紧固件机械性能第1部分:规定组别和性能等级的螺栓､螺钉和螺柱Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs with specified grades and property classes | 产品质量检验 | |
| 31652 | ISO3506-2:2020 | 紧固件耐腐蚀不锈钢紧固件的械性能第2部分:规定组别和性能等级的螺母Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts with specified grades and property classes | 产品质量检验 | |
| 31653 | ISO3506-3:2009 | 耐腐蚀不锈钢紧固件的机械性能第3部分:紧定螺钉及类似的不受拉应力的螺纹紧固件Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress | 产品质量检验 | 废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请 |
| 31654 | ISO3506-4:2009 | 耐腐蚀不锈钢紧固件的机械性能第4部分:自攻螺钉Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws | 产品质量检验 | 废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请 |
| 31655 | ISO3506-7:2024 | 紧固件耐腐蚀不锈钢紧固件的机械性能第7部分:规定等级和性能等级的平垫圈Fasteners-Mechanical properties of corrosion-resistant stainless steel fasteners-Part 7: Flat washers with specified grades and property classes | 产品质量检验 | |
| 31656 | ISO3549:2024 | 涂料用锌粉颜料规范和试验方法Zinc dust pigments for paints - Specifications and test methods | 产品质量检验 | |
| 31657 | ISO3597-2:2003 | 纺织玻璃钢--粗纱增强树脂棒机械性能的测定第2部分:弯曲强度的测定 Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 2: Determination of flexural strength | 产品质量检验 | |
| 31658 | ISO3597-3:2003 | 纺织玻璃钢--粗纱增强树脂棒机械性能的测定第3部分:抗压强度的测定 Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 3: Determination of compressive strength | 产品质量检验 | |
| 31659 | ISO3597-4:2003 | 纺织玻璃钢--粗纱增强树脂棒机械性能的测定第4部分:表观层间剪切强度的测定 Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 4: Determination of apparent interlaminar shear strength | 产品质量检验 | |
| 31660 | ISO36:2011 | 硫化或热塑性橡胶纺织纤维粘合强度的测定Rubber, vulcanized or thermoplastic - Determination of adhesion to textile fabrics | 产品质量检验 | 废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请 |
| 31661 | ISO36:2020 | 硫化橡胶或热塑性橡胶与织物粘合强度的测定Rubber,vulcanizedorthermoplastic--Determinationofadhesiontotextilefabrics | 产品质量检验 | |
| 31662 | ISO3613:2021 | 金属和其他无机涂层-锌､镉､铝锌合金和锌铝合金上的铬酸盐转化涂层的试验方法Metallic and other inorganic coatings - Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods | 产品质量检验 | |
| 31663 | ISO3616:2022 | 纺织玻璃纤维.短切纤维和连续纤维毡.平均厚度､负荷下厚度和压缩后恢复的测定Textile glass - Chopped-strand and continuous-filament mats - Determination of average thickness, thickness under load and recovery after compression | 产品质量检验 | |
| 31664 | ISO362-2:2009 | 道路车辆加速行驶时发出的噪声测量--工程方法第2部分:L类 Measurement of noise emitted by accelerating road vehicles - Engineering method - Part 2: L category | 产品质量检验 | |
| 31665 | ISO3651-1:1998 | 不锈钢耐晶间腐蚀的测定-第1部分:奥氏体和铁素体-奥氏体(双相)不锈钢-通过质量损失测量在硝酸介质中的腐蚀试验(休伊试验)Determination of resistance to intergranular corrosion of stainless steels -- Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels -- Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) | 产品质量检验 | |
| 31666 | ISO3651-2-1998 | 不锈钢耐晶间腐蚀的测定第2部分:铁氧体､奥氏体和铁氧体奥氏体(二重)不锈钢在含硫酸介质中的腐蚀试验Determination of resistance to intergranular corrosion of stainless steels -- Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels -- Corrosion test in media containing sulfuric acid | 产品质量检验 | |
| 31667 | ISO3651-2:1998 | 不锈钢耐晶间腐蚀的测定第2部分:铁素体､奥氏体及铁素体-奥氏体(双相)不锈钢含硫酸介质中的腐蚀试验Determination of resistance to intergranular corrosion of stainless steels -- Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels -- Corrosion test in media containing sulfuric acid | 产品质量检验 | |
| 31668 | ISO3651-3:2017 | 不锈钢耐晶间腐蚀的测定-第3部分:低Cr铁素体不锈钢的腐蚀试验Determination of resistance to intergranular corrosion of stainless steels - Part 3: Corrosion test for low-Cr ferritic stainless steels | 产品质量检验 | |
| 31669 | ISO3668:2017 | 油漆和清漆油漆颜色的视觉比较Paints and varnishes - Visual comparison of colour of paints | 产品质量检验 | |
| 31670 | ISO3675:1998 | 原油和液体石油产品-密度的实验室测定-比重计法Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method | 产品质量检验 | |
| 31671 | ISO3679:2004 | 闪点的测定-快速平衡闭杯法 Determination of flash point - Rapid equilibrium closed cup method | 产品质量检验 | 废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请 |
| 31672 | ISO3679:2022 | 闪燃､非闪燃和闪点的测定快速平衡闭杯法Determination of flash point - Method for flash no-flash and flash point by small scale closed cup tester | 产品质量检验 | |
| 31673 | ISO3681:2018 | 涂料和清漆用粘合剂--皂化值的测定--滴定法Binders for paints and varnishes - Determination of saponification value - Titrimetric method | 产品质量检验 | |
| 31674 | ISO3688:2022 | 纸浆实验室纸页的制备蓝光漫反射因数(ISO亮度)的测定Pulps-Preparation of laboratory sheets for the measurement of optical properties - Third Edition | 产品质量检验 | |
| 31675 | ISO3689:1983 | 纸和纸板-浸水后爆破强度的测定 Paper and board - Determination of bursting strength after immersion in water | 产品质量检验 | 废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请 |