一单一库标准查询 - 国家市场监督管理总局能力项目库
国家市场监督管理总局《检验检测机构资质认定能力项目库》在线查询系统 · 共 62,216 项国家标准/参数 · 支持按领域、编号、名称检索
本站提供 一单一库标准 在线查询与 CMA一单一库比对 功能，
基于国家市场监督管理总局 检验检测机构资质认定能力项目库，
帮助 第三方实验室 快速完成 实验室CMA认证 标准合规性检查与 标准能力校验。
📊
开始比对
上传 Excel 文件、粘贴标准数据、或加载样本数据，系统自动与一单一库比对
共 62,216 条标准/参数
| 序号 | 标准编号 | 标准(方法)名称 | 领域 | 备注 |
|---|---|---|---|---|
| 31451 | ISO2440:2025 | 软质和硬质泡沫聚合材料-加速老化试验Flexible and rigid cellular polymeric materials-Accelerated ageing tests | 产品质量检验 | |
| 31452 | ISO247-2:2018 | 橡胶 灰分的测定 第2部分:热重分析法 Rubber - Determination of ash - Part 2: Thermogravimetric analysis (TGA) | 产品质量检验 | |
| 31453 | ISO2470-1:2016 | 纸､纸板和纸浆.蓝光漫反射因数的测定.室内日光条件Paper, board and pulps -- Measurement of diffuse blue reflectance factor -- Part 1: Indoor daylight conditions (ISO brightness) | 产品质量检验 | |
| 31454 | ISO2470-2:2008 | 纸､纸板和纸浆.蓝光漫反射因数的测量.室外日光条件Paper, board and pulps -- Measurement of diffuse blue reflectance factor -- Part 2: Outdoor daylight conditions (D65 brightness) | 产品质量检验 | |
| 31455 | ISO2471:2008 | 纸和纸板不透明度(纸背衬)的测定(漫反射法)Paper and board -- Determination of opacity (paper backing) -- Diffuse reflectance method | 产品质量检验 | |
| 31456 | ISO2477:2005 | 成型隔热耐火制品--加热时尺寸永久变化的测定 Shaped insulating refractory products - Determination of permanent change in dimensions on heating | 产品质量检验 | |
| 31457 | ISO248-1:2021 | 生橡胶挥发分含量的测定第1部分:热辊法和烘箱法Rubber, raw - Determination of volatile-matter content - Part 1: Hot-mill method and oven method | 产品质量检验 | |
| 31458 | ISO2493-1:2010 | 纸和纸板-弯曲挺度的测定-第1部分:恒定弯曲法Paper and board -- Determination of bending resistance -- Part 1: Constant rate of deflection | 产品质量检验 | |
| 31459 | ISO2493-2:2020 | 纸和纸板弯曲挺度的测定第2部分:泰伯法Paper and board - Determination of resistance to bending -Part 2:Taber-type tester | 产品质量检验 | |
| 31460 | ISO251:2024 | 织物芯骨架输送带宽度和长度Conveyor belts with textile carcass-Widths and lengths | 产品质量检验 | |
| 31461 | ISO25101:2009 | 水质与灰分全氟辛烷磺酸(PFOS)和全氟辛酸(PFOA)的测定-用固相萃取和液相色谱/质谱法测定未过滤样品的方法Water quality - Determination of perfluorooctanesulfonate (PFOS) and perfluorooctanoate (PFOA) - Method for unfiltered samples using solid phase extraction and liquid chromatography/mass spectrometry | 产品质量检验 | |
| 31462 | ISO25217:2009 | 粘合剂--用双悬臂梁和锥形双悬臂梁试样测定结构粘接接头的模式1粘接断裂能 Adhesives - Determination of the mode 1 adhesive fracture energy of structural adhesive joints using double cantilever beam and tapered double cantilever beam specimens | 产品质量检验 | |
| 31463 | ISO2535:2001 | 塑料制品;不饱和聚酯树脂--环境温度下凝胶时间的测量 Plastics - Unsaturated-polyester resins - Measurement of gel time at ambient temperature | 产品质量检验 | |
| 31464 | ISO2549:1972/Cor.1:1990 | 手工打结地毯-地组织以上绒簇股长度的测定Hand-knottedcarpers-Determinationoftuftleglengthabovethewovenground | 产品质量检验 | |
| 31465 | ISO2551:2020 | 机制铺地织物受不同水和热影响引起尺寸变化的测定Textile floor coverings and textile floor coverings in tile form - Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of plane | 产品质量检验 | |
| 31466 | ISO25518:2021 | 一次性橡胶手套通用规范Single-use rubber gloves for general applications - Specification (First Edition) | 产品质量检验 | |
| 31467 | ISO2555:2018 | 塑料 - 液态树脂或乳液或分散体 - 使用单缸式旋转粘度计法测定表观粘度Plastics - Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity using a single cylinder type rotational viscometer method | 产品质量检验 | |
| 31468 | ISO2558:2010 | 塑料增强用纺织玻璃短切原丝毡--粘合剂在苯乙烯中溶解时间的测定 Textile glass chopped-strand mats for reinforcement of plastics - Determination of time of dissolution of the binder in styrene | 产品质量检验 | |
| 31469 | ISO2560:2020 | 非合金钢及细晶粒钢焊条Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification | 产品质量检验 | |
| 31470 | ISO25619-1:2021 | 土工合成材料-压缩特性的测定-第1部分:压缩蠕变特性Geosynthetics-Determinationofcompressionbehaviour-Part1:Compressivecreepproperties | 产品质量检验 | |
| 31471 | ISO25619-2:2015 | 土工合成材料压缩性能的测定第2部分:短期压缩性能的测定Geosynthetics -- Determination of compression behaviour -- Part 2: Determination of short-term compression behaviour | 产品质量检验 | |
| 31472 | ISO2570:1995 | 热塑性塑料管材､管件维卡软化温度的测定Test method for flexural properties of resin casting body | 产品质量检验 | |
| 31473 | ISO2577-2007 | 塑料-热固性模塑材料收缩率的测定Plastics-Thermosetting moulding materials-Determination of shrinkage | 产品质量检验 | |
| 31474 | ISO25861:2007 | 船舶与海洋技术--导航--日光信号灯Ships and marine technology - Navigation - Daylight signalling lamps | 产品质量检验 | |
| 31475 | ISO2589-2016 | 皮革物理和机械试验厚度的测定Leather - Physical and mechanical tests - Determination of thickness | 产品质量检验 |