一单一库标准查询 - 国家市场监督管理总局能力项目库
国家市场监督管理总局《检验检测机构资质认定能力项目库》在线查询系统 · 共 62,216 项国家标准/参数 · 支持按领域、编号、名称检索
本站提供 一单一库标准 在线查询与 CMA一单一库比对 功能，
基于国家市场监督管理总局 检验检测机构资质认定能力项目库，
帮助 第三方实验室 快速完成 实验室CMA认证 标准合规性检查与 标准能力校验。
📊
开始比对
上传 Excel 文件、粘贴标准数据、或加载样本数据，系统自动与一单一库比对
共 62,216 条标准/参数
| 序号 | 标准编号 | 标准(方法)名称 | 领域 | 备注 |
|---|---|---|---|---|
| 30751 | ISO15181-5:2008 | 色漆和清漆--测定防污油漆Spart5中杀生物剂的释放速率:通过测定提取物中二甲基甲苯基磺酰胺(DMST)和二甲基苯基磺酰胺(DMSA)的浓度计算甲苯基氟烷和二氯氟烷的释放速率Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 5: Calculation of the tolylfluanid and dichlofluanid release rate by determination of the concentration of dimethyltolylsulfamide (DMST) and dimethylphenylsulfamide (DMSA) in the extract | 产品质量检验 | |
| 30752 | ISO15181-6:2012 | 色漆和清漆--测定防污颜料Spart6中杀生物剂的释放速率:通过定量测定提取物中的降解产物来测定曲吡啉的释放速率Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 6: Determination of tralopyril release rate by quantitation of its degradation product in the extract | 产品质量检验 | |
| 30753 | ISO15184:2020 | 色漆和清漆铅笔法测定漆膜硬度Paints and varnishes - Determination of film hardness by pencil test | 产品质量检验 | |
| 30754 | ISO1519:2011 | 色漆和清漆弯曲试验(圆柱轴)Paints and varnishes -- Bend test (cylindrical mandrel) | 产品质量检验 | |
| 30755 | ISO1520:2006 | 色漆和清漆杯突试验Paints and varnishes -- Cupping test | 产品质量检验 | |
| 30756 | ISO1521:1973 | 色漆和清漆耐水性的测定浸水法Paints and varnishes - Determination of resistance to water - Water immersion method | 产品质量检验 | 废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请 |
| 30757 | ISO15218:2003 | 气压传动-二位三通电磁阀-安装接口表面Pneumatic fluid power -- 3/2 solenoid valves -- Mounting interface surfaces | 产品质量检验 | |
| 30758 | ISO1522:2022 | 色漆和清漆摆杆阻尼试验Paints and varnishes - Pendulum damping test | 产品质量检验 | |
| 30759 | ISO15222:2021 | 卡车和公共汽车轮胎.相对湿抓性能的测量方法.装载的新轮胎Truck and bus tyres - Method for measuring relative wet grip performance - Loaded new tyres | 产品质量检验 | 废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请 |
| 30760 | ISO15222:2025 | 卡车和公共汽车轮胎-相对湿抓性能的测量方法-装载新轮胎 Truck and bus tyres - Method for measuring relative wet grip performance - Loaded new tyres | 产品质量检验 | |
| 30761 | ISO1523:2002 | 闪点测定闭杯平衡法Determination of flash point -- Closed cup equilibrium method | 产品质量检验 | |
| 30762 | ISO15236-1:2016 | 钢丝绳输送带-第1部分:通用输送带的设计､尺寸和机械要求Steel cord conveyor belts -- Part 1: Design, dimensions and mechanical requirements for conveyor belts for general use | 产品质量检验 | |
| 30763 | ISO1524:2000 | 色漆､清漆和印刷油墨.研磨细度的测定Paints, varnishes and printing inks - Determination of fineness of grind | 产品质量检验 | 废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请 |
| 30764 | ISO1524:2020 | 色漆､清漆和印刷油墨研磨细度的测定Paints, varnishes and printing inks - Determination of fineness of grind | 产品质量检验 | |
| 30765 | ISO15318-1999 | 纸浆､纸和纸板.对7个指定的多氯联苯(PCB)的测定Pulp, paper and board -- Determination of 7 specified polychlorinated biphenyls (PCB) | 产品质量检验 | |
| 30766 | ISO15320:2011 | 纸浆､纸和纸板--水抽提液中五氯苯酚的测定Pulp, paper and board -- Determination of pentachlorophenol in an aqueous extract | 产品质量检验 | |
| 30767 | ISO15330:1999 | 紧固件检查氢脆用预载荷试验平行支承面法Fasteners -- Preloading test for the detection of hydrogen embrittlement -- Parallel bearing surface method | 产品质量检验 | |
| 30768 | ISO15349-2:2021 | 非合金钢 - 低碳含量测定 - 第2部分:感应炉燃烧后的红外线吸收法(带预热)Unalloyed steel - Determination of low carbon content - Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) | 产品质量检验 | |
| 30769 | ISO15350-2000 | 钢和铁总碳及总硫量的测定感应炉中燃烧后的红外吸收法(常规法)Steel and iron -- Determination of total carbon and sulfur content -- Infrared absorption method after combustion in an induction furnace (routine method) | 产品质量检验 | |
| 30770 | ISO15350:2000 | 钢铁总碳硫含量的测定高频感应炉燃烧后红外吸收法(常规方法)Steel and iron -- Determination of total carbon and sulfur content -- Infrared absorption method after combustion in an induction furnace (routine method) | 产品质量检验 | |
| 30771 | ISO15351-1999 | 钢与铁氮含量的测定惰性气体融合后热电导测量法(常规方法)Steel and iron -- Determination of nitrogen content -- Thermal conductimetric method after fusion in a current of inert gas (Routine method) | 产品质量检验 | |
| 30772 | ISO15351:1999 | 钢铁氮含量的测定惰性气体熔融热导法(常规方法)Steel and iron -- Determination of nitrogen content -- Thermal conductimetric method after fusion in a current of inert gas (Routine method) | 产品质量检验 | |
| 30773 | ISO15379-1:2019 | 碳质材料用于生产铝还原阴极块材料-第1部分:肿胀由于在压力下渗透钠测量Carbonaceous materials for the production of aluminium-Cathode block materials-Part 1: Determination of the expansion due to sodium penetration with application of pressure | 产品质量检验 | |
| 30774 | ISO15387:2025 | 航天系统单结太阳电池测量与标定程序Space systems - Single-junction solar cells - Measurements and calibration procedures | 产品质量检验 | |
| 30775 | ISO15487:2018 | 纺织品评定家庭洗涤和干燥后衣服和其他纺织品外观的方法Textiles - Method for assessing appearance of apparel and other textile end products after domestic washing and drying | 产品质量检验 |