一单一库标准查询 - 国家市场监督管理总局能力项目库
国家市场监督管理总局《检验检测机构资质认定能力项目库》在线查询系统 · 共 62,216 项国家标准/参数 · 支持按领域、编号、名称检索
本站提供 一单一库标准 在线查询与 CMA一单一库比对 功能，
基于国家市场监督管理总局 检验检测机构资质认定能力项目库，
帮助 第三方实验室 快速完成 实验室CMA认证 标准合规性检查与 标准能力校验。
📊
开始比对
上传 Excel 文件、粘贴标准数据、或加载样本数据，系统自动与一单一库比对
共 62,216 条标准/参数
| 序号 | 标准编号 | 标准(方法)名称 | 领域 | 备注 |
|---|---|---|---|---|
| 30701 | ISO1460:2020 | 金属涂层黑色金属材料上的热浸镀锌涂层单位面积质量的测定重量分析法Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area | 产品质量检验 | |
| 30702 | ISO1461:2022 | 金属覆盖层钢铁制件热浸镀锌层技术要求及试验方法Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods | 产品质量检验 | |
| 30703 | ISO1463:2021 | 金属和氧化物涂层涂层厚度的测量显微镜法Metallic and oxide coatings - Measurement of coating thickness - Microscopical method | 产品质量检验 | |
| 30704 | ISO14656:1999 | 混凝土加筋钢涂层用环氧树脂粉末和密封材料Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete | 产品质量检验 | |
| 30705 | ISO14680-2:2000 | 色漆和清漆颜料含量的测定第2部分:灰化法Paints and varnishes -- Determination of pigment content -- Part 2: Ashing method | 产品质量检验 | |
| 30706 | ISO14687:2025(E) | 氢燃料质量-产品规范Hydrogen fuel quality-Product specification | 产品质量检验 | |
| 30707 | ISO14723:2025 | 石油和天然气工业 包括低碳能源 管道运输系统 海底管道阀门Oil and gas industries including lower carbon energy - Pipeline transportation systems - Subsea pipeline valves | 产品质量检验 | |
| 30708 | ISO14737:2021 | 一般工程用铸造碳钢件Carbon and low alloy cast steels for general applications | 产品质量检验 | |
| 30709 | ISO14743:2020 | 气动用于塑料管的插入式管接头Pneumatic fluid power - Push-in connectors for thermoplastic tubes | 产品质量检验 | |
| 30710 | ISO148-1:2016 | 金属材料夏比摆锤冲击试验第1部分:试验方法Metallic materials -- Charpy pendulum impact test -- Part 1: Test method | 产品质量检验 | |
| 30711 | ISO148-3:2016 | Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines 摆锤式冲击试验机检验用夏比V型缺口标准试样 | 产品质量检验 | |
| 30712 | ISO14851:2019 | 测定水性介质中塑料材料的最终好氧生物降解性 - 通过测量封闭式呼吸仪中的氧气需求的方法Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by measuring the oxygen demand in a closed respirometer | 产品质量检验 | |
| 30713 | ISO14852:2021 | 水介质中塑料材料富氧菌生物降解性的测定二氧化碳增重分析法Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide | 产品质量检验 | |
| 30714 | ISO14855-1:2012 | 塑料材料在受控堆肥条件下最终需氧生物降解能力的测定析出二氧化碳的分析方法第1部分:一般方法Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions -- Method by analysis of evolved carbon dioxide -- Part 1: General method | 产品质量检验 | |
| 30715 | ISO14855-2:2018 | 控制堆肥条件下塑料材料最终好氧生物降解性的测定 - 通过分析二氧化碳进行分析的方法 - 第2部分:实验室规模测试中二氧化碳的重量测量Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test | 产品质量检验 | |
| 30716 | ISO14890:2013 | 输送带具有橡胶或塑料覆盖层的普通用途织物芯输送带规范Conveyor belts -- Specification for rubber- or plastics-covered conveyor belts of textile construction for general use | 产品质量检验 | 废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请 |
| 30717 | ISO14903:2025 | 制冷系统及热泵部件和接头的密封性评定Refrigerating systems and heat pumps-Qualification of tightness of components and joints | 产品质量检验 | |
| 30718 | ISO14911:1998 | 水质 离子色谱法测定水和废水中溶解性锂离子､钠离子､铵离子､钾离子､锰离子､钙离子､镁离子､锶离子和钡离子(Water quality-Determination of dissolved Li+, Na+, NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ using ion chromatography-Method for water and waste water) | 产品质量检验 | |
| 30719 | ISO14931:2021 | 皮革制衣用皮革的选择指南(毛皮除外)Leather - Leather for apparel (excluding furs) - Specifications and sampling procedures | 产品质量检验 | |
| 30720 | ISO14955-2:2018 | 机床 - 机床的环境评估 - 第2部分:测量供给机床和机床组件的能量的方法Machine tools - Environmental evaluation of machine tools - Part 2: Methods for measuring energy supplied to machine tools and machine tool components | 产品质量检验 | |
| 30721 | ISO14955-3:2020 | 机床机床环境评价第3部分:金属切削机床能效试验原理Machine tools - Environmental evaluation of machine tools - Part 3: Principles for testing metal-cutting machine tools with respect to energy efficiency | 产品质量检验 | |
| 30722 | ISO1496-3:2019 | 系列1货运集装箱 - 规格和测试 - 第3部分:用于液体 气体和加压干散装的罐式集装箱Series 1 freight containers - Specification and testing - Part 3: Tank containers for liquids, gases and pressurized dry bulk | 产品质量检验 | 仅限非特种设备检测 |
| 30723 | ISO14982:1998 | 农林机械;电磁兼容性-试验方法和验收标准 Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria | 产品质量检验 | |
| 30724 | ISO14993:2018 | 金属和合金的腐蚀 - 加速试验 涉及循环暴露于盐雾 干燥和潮湿条件下Corrosion of metals and alloys - Accelerated testing involving cyclic exposure to salt mist, dry and wet conditions | 产品质量检验 | 废止，仅限能力项目库范围内现行有效产品标准引用本标准及监督抽检时申请 |
| 30725 | ISO14993:2026 | 金属和合金的腐蚀 - 加速试验 涉及循环暴露于盐雾 干燥和潮湿条件下Corrosion of metals and alloys - Accelerated testing involving cyclic exposure to salt mist, dry and wet conditions | 产品质量检验 |