一单一库标准查询 - 国家市场监督管理总局能力项目库
国家市场监督管理总局《检验检测机构资质认定能力项目库》在线查询系统 · 共 56,591 项国家标准/参数 · 支持按领域、编号、名称检索
本站提供 一单一库标准 在线查询与 CMA一单一库比对 功能，
基于国家市场监督管理总局 检验检测机构资质认定能力项目库，
帮助 第三方实验室 快速完成 实验室CMA认证 标准合规性检查与 标准能力校验。
📊
开始比对
上传 Excel 文件、粘贴标准数据、或加载样本数据，系统自动与一单一库比对
共 56,591 条标准/参数
| 序号 | 标准编号 | 标准(方法)名称 | 领域 | 备注 |
|---|---|---|---|---|
| 29476 | ISO8780-1:1990 | 颜料和稀释剂色散特性评定用色散方法第1部分:前言Pigments and extenders -- Methods of dispersion for assessment of dispersion characteristics -- Part 1: Introduction | 产品质量检验 | |
| 29477 | ISO8780-3:1990 | 颜料和稀释剂色散特性评定用色散方法第3部分:用高速叶轮机分散Pigments and extenders -- Methods of dispersion for assessment of dispersion characteristics -- Part 3: Dispersion using a high-speed impeller mill | 产品质量检验 | |
| 29478 | ISO8780-5:1990 | 颜料和稀释剂色散特性评定用色散方法第5部分:用自动研磨机分散Pigments and extenders -- Methods of dispersion for assessment of dispersion characteristics -- Part 5: Dispersion using an automatic muller | 产品质量检验 | |
| 29479 | ISO8781-1:1990 | 颜料和稀释剂色散特性评定方法第1部分:有色颜料着色力变化的评定Pigments and extenders -- Methods of assessment of dispersion characteristics -- Part 1: Assessment from the change in tinting strength of coloured pigments | 产品质量检验 | |
| 29480 | ISO8781-2:1990 | 颜料和体质颜料分散性的评定方法第2部分:研磨细度变化的测定Pigments and extenders -- Methods of assessment of dispersion characteristics -- Part 2: Assessment from the change in fineness of grind | 产品质量检验 | |
| 29481 | ISO8781-3:1990 | 颜料和体质颜料分散性的评定方法第3部分:光泽变化评定Pigments and extenders -- Methods of assessment of dispersion characteristics -- Part 3: Assessment from the change in gloss | 产品质量检验 | |
| 29482 | ISO8784-1:2014 | 纸浆和纸板-微生物检验-第1部分:基于分解的细菌和细菌孢子的计数Pulp, paper and board - Microbiological examination - Part 1: Enumeration of bacteria and bacterial spores based on disintegration | 产品质量检验 | |
| 29483 | ISO8787:1986 | 纸和纸板毛细吸液高度的测定(克列姆法)Paper and board -- Determination of capillary rise -- Klemm method | 产品质量检验 | |
| 29484 | ISO8791-2:2013 | 纸和纸-板粗糙度/平滑度的测定(空气泄漏法)第2部分:本特生法Paper and board -- Determination of roughness/smoothness (air leak methods) -- Part 2: Bendtsen method | 产品质量检验 | |
| 29485 | ISO8791-4:2021 | 纸和纸-板粗糙度/平滑度的测定(空气泄漏法)第4部分:印刷表面法Paper and board - Determination of roughness/smoothness (air leak methods) - Part 4: Print-surf method | 产品质量检验 | |
| 29486 | ISO8820-1:2014 | 道路车辆熔断器第1部分:定义和通用试验要求Road vehicles -- Fuse-links -- Part 1: Definitions and general test requirements | 产品质量检验 | |
| 29487 | ISO8820-3:2015 | 道路车辆熔断器第3部分:片式熔断器,C型(中型),E型(高电流)和F型(微型)Road vehicles -- Fuse-links -- Part 3: Fuse-links with tabs (blade type) Type C (medium), Type E (high current) and Type F (miniature) | 产品质量检验 | |
| 29488 | ISO8820-4:2016 | 道路车辆熔断器第4部分:插座式(A型)和螺栓式(B型)的熔断器及其试验夹具Road vehicles-Fuse-links-Part 4: Fuse-links with female contacts (type A) and bolt-in contacts (type B) and their test fixtures | 产品质量检验 | |
| 29489 | ISO8820-5:2015 | 道路车辆-熔断器-第5部分:板型熔断器SF30和SF51型及测试夹具Road vehicles -- Fuse-links -- Part 5: Fuse-links with axial terminals (Strip fuse-links) Types SF 30 and SF 51 and test fixtures | 产品质量检验 | |
| 29490 | ISO8820-8:2019 | 道路车辆熔断器第8部分:额定电压450V的带螺栓触点的熔断器(H型和J型) Road vehicles - Fuse-links - Part 8: Fuse-links with bolt-in contacts (Type H and J) with rated voltage of 450 V | 产品质量检验 | |
| 29491 | ISO8820-9:2014 | 道路车辆熔断器第9部分:短引脚式熔断器(K型)Road vehicles -- Fuse-links -- Part 9: Fuse-links with shortened tabs (Type K) | 产品质量检验 | |
| 29492 | ISO8873-1-2006 | 喷涂硬质聚氨酯泡沫塑料第1部分:材料规范Rigid cellular plastics -- Spray-applied polyurethane foam for thermal insulation -- Part 1: Material specifications | 产品质量检验 | |
| 29493 | ISO8974-2002 | 气相色谱法测定酚醛树脂中残留苯酚含量Plastics - Phenolic Resins - Determination of Residual Phenol Content by Gas Chromatography Third Edition | 产品质量检验 | |
| 29494 | ISO8975-1989 | 酚醛树脂pH值的测定Plastics -- Phenolic resins -- Determination of pH | 产品质量检验 | |
| 29495 | ISO898-1:2013 | 碳钢和合金钢制造的紧固件机械性能第1部分:规定性能等级的螺栓､螺钉和螺柱粗牙螺纹和细牙螺纹Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898- 1:2013) | 产品质量检验 | |
| 29496 | ISO898-2:2022 | 紧固件碳钢和合金钢紧固件的机械性能第2部分:规定性能等级的螺母Fasteners. Mechanical properties of fasteners made of carbon steel and alloy steel. - Part 2: Nuts with specified property classes | 产品质量检验 | |
| 29497 | ISO898-3:2018+Amd1:2020 | 碳钢和合金钢紧固件机械性能第3部分:规定性能等级的平垫圈Mechanical properties of fasteners made of carbon steel and alloy steel -Part 3: Flat washers with specified property classes | 产品质量检验 | |
| 29498 | ISO898-5:2012 | 紧固件机械性能螺栓与螺钉的扭矩试验和破坏扭矩公称直径1~10mmMechanical properties of fasteners made of carbon steel and alloy steel -- Part 5: Set screws and similar threaded fasteners with specified hardness classes -- Coarse thread and fine pitch thread | 产品质量检验 | |
| 29499 | ISO898-7:1992 | 紧固件机械性能第7部分:螺栓和螺钉的扭矩试验和最小扭矩公称直径1mm-10mmMechanical properties of fasteners -- Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm | 产品质量检验 | |
| 29500 | ISO8980-1:2017 | 眼科光学-未切边成品眼镜片-第1部分:单光和多焦点镜片要求Ophthalmic optics - Uncut finished spectacle lenses - Part 1: Specifications for single-vision and multifocal lenses | 产品质量检验 |