一单一库标准查询 - 国家市场监督管理总局能力项目库
国家市场监督管理总局《检验检测机构资质认定能力项目库》在线查询系统 · 共 56,591 项国家标准/参数 · 支持按领域、编号、名称检索
本站提供 一单一库标准 在线查询与 CMA一单一库比对 功能，
基于国家市场监督管理总局 检验检测机构资质认定能力项目库，
帮助 第三方实验室 快速完成 实验室CMA认证 标准合规性检查与 标准能力校验。
📊
开始比对
上传 Excel 文件、粘贴标准数据、或加载样本数据，系统自动与一单一库比对
共 56,591 条标准/参数
| 序号 | 标准编号 | 标准(方法)名称 | 领域 | 备注 |
|---|---|---|---|---|
| 25151 | IEC/TR60575:1977 | 绝缘子串元件的热机和机械性能试验Thermal-mechanical performance test and mechanical performance test on string insulator units | 产品质量检验 | |
| 25152 | IEC/TR60755:2008 | 剩余电流动作保护电器(RCD)的一般要求The requirements of this technical report apply to residual current operated protective devices (hereinafter referred to as "residual current devices General requirements for residual current operated protective devices | 产品质量检验 | |
| 25153 | IEC/TR60797:1984 | 架空线路用玻璃或陶瓷绝缘子串单元在电介质受到机械损伤后的残余强度Residual strength of string insulator units of glass or ceramic material for overhead lines after mechanical damage of the dielectric | 产品质量检验 | |
| 25154 | IEC/TR61341:2010 | 反射灯中心光强和光束角的测量方法Method of measurement of centre beam intensity and beam angle(s) of reflector lamps Mhode de mesure de lntensitdans lxe du faisceau et de langle (ou des angles) duverture des lampes rlecteur Edition 2.0 | 产品质量检验 | |
| 25155 | IEC/TR61641:2014 | 封闭式低压成套开关设备和控制设备在内部故障引起电弧情况下的试验导则Enclosed low-voltage switchgear and controlgear assemblies - Guide for testing under conditions of arcing due to internal fault | 产品质量检验 | |
| 25156 | IEC/TR61800-6:2003 | 调速电气传动系统第6部分:确定负载工作类型和相应电流额定值的导则Adjustable speed electrical power drive systems - Part 6: Guide for determination of types of load duty and corresponding current ratings | 产品质量检验 | |
| 25157 | IEC/TR62063:1999 | 高压开关设备和控制设备 附属装置中电子和辅助技术的使用 High-voltage switchgear and controlgear - The use of electronic and associated technologies in auxiliary equipment of switchgear and controlgear | 产品质量检验 | |
| 25158 | IEC/TR62271-302:2010 | 高压开关设备和控制设备第302部分:具有预定极间不同期操作高压交流断路器High-voltage switchgear and controlgear - Part 302: Alternating current circuit-breakers with intentionally non-simultaneous pole operation | 产品质量检验 | |
| 25159 | IEC/TR62271-307:2015 | 3.6kV~40.5kV交流金属封闭开关设备和控制设备型式试验有效性的延伸导则High-voltage switchgear and controlgear - Part 307: Guidance for the extension of validity of type tests of AC metal and solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV | 产品质量检验 | |
| 25160 | IEC/TR62271-310:2008 | 高压开关设备和控制设备-第310部分:额定电压52kV及以上断路器的电寿命试验 High-voltage switchgear and controlgear - Part 310: Electrical endurance testing for circuit-breakers above a rated voltage of 52 kV | 产品质量检验 | |
| 25161 | IEC/TR62541-1:2010 | OPC统一架构第1部分:概述和概念OPC Unified architecture - Part 1: Overview and concepts | 产品质量检验 | |
| 25162 | IEC/TR62541-2:2010 | OPC统一架构第2部分:安全模型This part of IEC 62541@ which a Technical Report@ describes the OPC unified architecture (OPC UA) security model. It describes the security threats OPC Unified Architecture - Part 2: Security Model (Edition 2.0 | 产品质量检验 | |
| 25163 | IEC/TRⅡ61640:1998 | 额定电压72.5kV及以上刚性气体绝缘输电线路This technical report applies to rigid HV gas-insulated transmission lines (GIL) in which the insulation is obtained, at least partly Rigid high-voltage, gas-insulated transmission lines for rated voltage of 72,5 kV and above | 产品质量检验 | |
| 25164 | IEC/TS60110-2:2000 | 感应加热装置用电力电容器第2部分:老化试验､破坏试验和内部熔丝隔离要求Power capacitors for induction heating installations - Part 2: Ageing test, destruction test and requirements for disconnecting internal fuses | 产品质量检验 | |
| 25165 | IEC/TS60695-11-4:2004 | 电工电子产品着火危险试验第22部分:试验火焰50W火焰装置和确认试验方法Provides detailed requirements for the production of a 50 W nominal, pre-mixed type test flame. The approximate overall height is 20 mm. The main Fire hazard testing - Part 11-4: Test flames - 50 W flames - Apparatus and confirmational test methods | 产品质量检验 | |
| 25166 | IEC/TS60815-1:2008 | 污秽条件下使用的高压绝缘子的选择和尺寸确定 第1部分:定义､信息和一般原则 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 1: Definitions, information and general principles | 产品质量检验 | |
| 25167 | IEC/TS60815-2:2008 | 污秽条件下使用的高压绝缘子的选择和尺寸确定 第2部分:交流系统用瓷和玻璃绝缘子 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 2: Ceramic and glass insulators for a.c. systems | 产品质量检验 | |
| 25168 | IEC/TS60815-3:2008 | 污秽条件下使用的高压绝缘子的选择和尺寸确定 第3部分:交流系统用复合绝缘子 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 3: Polymer insulators for a.c. systems | 产品质量检验 | |
| 25169 | IEC/TS60871-2:1999 | 标称电压1000V以上交流电力系统用并联电容器第2部分:老化试验This technical specification applies to capacitors according to IEC 60871-1 and gives the requirements for overvoltage cycling and ageing tests Shunt capacitors for a.c. power systems having a rated voltage above 1000 V - Part 2: Endurance testing | 产品质量检验 | |
| 25170 | IEC/TS60871-2:2014 | 标称电压1000V以上交流电力系统用并联电容器第2部分:老化试验This part of IEC 60871, which is a technical specification, applies to capacitors according to IEC 60871-1 and gives the requirements for ageing tests Shunt capacitors for AC power systems having a rated voltage above 1000 V - Part 2: Endurance testing | 产品质量检验 | |
| 25171 | IEC/TS60871-3:2015 | 标称电压1kV以上交流电力系统用并联电容器 第3部分:并联电容器和并联电容器组的保护 Shunt capacitors for a.c. power systems having a rated voltage above 1000 V - Part 3: Protection of shunt capacitors and shunt capacitor banks | 产品质量检验 | |
| 25172 | IEC/TS61245:1993 | 直流系统用高压绝缘子的人工污秽试验 Artificial pollution tests on high-voltage insulators to be used on d.c. systems | 产品质量检验 | |
| 25173 | IEC/TS61439-7:2014 | 低压成套开关设备和控制设备第7部分:特定应用的成套设备--如码头､露营地､市集广场､电动车辆充电站Low-voltage switchgear and controlgear assemblies - Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicles charging stations | 产品质量检验 | |
| 25174 | IEC/TS61640:1998 | 额定电压72.5kV及以上刚性气体绝缘输电线路 Rigid high-voltage, gas-insulated transmission lines for rated voltage of 72,5 kV and above | 产品质量检验 | |
| 25175 | IEC/TS62073:2016 | 绝缘子表面湿润性测量导则Guidance on the measurement of hydrophobicity of insulator surfaces | 产品质量检验 |